1 1

Waterborne Ceiling Paint F508

Waterborne Ceiling Paint F508

$82.99 CAD
$0.00 CAD $82.99 CAD
Sold out
Shipping calculated at checkout.
Paint coverage calculator
Size
Colour
.cpf-in{display:inline-block;margin-left:7px;padding:1px 7px;border-radius:9px;background:#eef3ee;color:#3f6b45;font-size:11px;font-weight:600;vertical-align:middle} View full details

Product Overview

Uniquely formulated to consistently deliver the most beautiful ceilings in any colour by minimizing imperfections and glare.

Features

  • Ultra-flat finish that hides imperfections, minimizes lap marks and reduces glare
  • Formulated to drastically minimize spatter for easier clean up
  • Dries quickly for fast recoat
  • Low VOC and provides a mildew-resistant coating
  • Available in 3,500+ unmatchable colours
  • Backed by Gennex Colour Technology®, our unbeatable combination of proprietary colorants and formulas

Data Sheets

SDS

TDS

Read More
Specifications
Finish Flat VOC Range <50g/L
Dry Time 1 Hour Recoat Time 1-2 Hour
Surface Plaster, Drywall, Ceiling Tile, Masonry, Wood Coverage (Sq. Ft./Gal) 400-450
Number of Recommended Coats 1-2 Resin Vehicle Type Waterborne, Acrylic, Latex
Application Method Roll, Brush, Spray Project Ceiling
Finish
Flat
VOC Range
<50g/L
Dry Time
1 Hour
Recoat Time
1-2 Hour
Surface
Plaster, Drywall, Ceiling Tile, Masonry, Wood
Coverage (Sq. Ft./Gal)
400-450
Number of Recommended Coats
1-2
Resin Vehicle Type
Waterborne, Acrylic, Latex
Application Method
Roll, Brush, Spray
Project
Ceiling
Surface Preparation(Prep Guide)
  • Clean surfaces to remove dirt, grease, and stains. Rinse thoroughly and allow to dry.
  • Repair cracks, nail holes, and surface imperfections with spackling compound.
  • Lightly sand glossy or previously painted surfaces for better adhesion.
  • Remove all sanding dust using a damp or tack cloth.
  • Prime new drywall, repaired areas, or surfaces with major color changes.
Application Guide
  • Stir paint thoroughly before use. Do not shake.
  • Cut in edges along ceilings, trim, and corners with a brush.
  • Roll large wall areas using a W-pattern for even coverage.
  • Maintain a wet edge to prevent lap marks.
  • Apply two coats for best color depth and durability.

Dry Time: Approximately 1 hour to touch, 2–4 hours between coats.

Cleanup & Maintenance
  • Clean brushes and rollers with warm water and soap.
  • Allow paint to cure for 14 days before washing.
  • Clean painted surfaces gently using a soft cloth or sponge.
  • Avoid abrasive cleaners.
Important Notes

Colors may vary due to lighting and screen settings. Always test a sample before full application.

This product is intended for interior use only and is not recommended for floors or exterior surfaces.