Product Overview
The most discerning designers and homeowners insist on Aura for its stunning colour & incomparable quality.
Features
- Proprietary Colour Lock® technology ensuring long-lasting colour and no color rub-off
- Unparalleled colour depth and richness with smooth, uniform colour
- Ultimate performance in hide for fewer coats
- Resists scuffing and burnishing
- Mildew-resistant finish
- Paint and primer together
- Seamless touch-ups
- Engineered with Gennex® Colour Technology
Data Sheets
SDS
TDS
Specifications
| Color | Multicolor | Finish | Satin |
| Suitable space | Interior | VOC Range | < 50 |
| Dry Time | 1 Hour | Clean Up | Soap and Water |
| Recoat Time | 1 Hour | Segment | Residential, Commercial |
| Surface | Brick, Concrete, Drywall, Masonry, Plaster, Wood | Compliance & Certifications | VOC compliant in all areas |
| Coverage (Sq. Ft./Gal) | 350-400 | Application Temp Range (°F) | 50-90 |
| Number of Recommended Coats | 1 or 2 | Application Spray Pressure (PSI) | Pressure / 1,000 – 2,000 PSI Tip / 0.013 – 0.017 |
| Resin Vehicle Type | Acrylic, Latex, Waterborne | Application Method | Roll, Brush, Spray |
| Project | Cabinet, Bathroom, Trim, Basement, Living Room, Door, Kitchen, Bedroom | Return to service | 14 days |
Color
Multicolor
Finish
Satin
Suitable space
Interior
VOC Range
< 50
Dry Time
1 Hour
Clean Up
Soap and Water
Recoat Time
1 Hour
Segment
Residential, Commercial
Surface
Brick, Concrete, Drywall, Masonry, Plaster, Wood
Compliance & Certifications
VOC compliant in all areas
Coverage (Sq. Ft./Gal)
350-400
Application Temp Range (°F)
50-90
Number of Recommended Coats
1 or 2
Application Spray Pressure (PSI)
Pressure / 1,000 – 2,000 PSI Tip / 0.013 – 0.017
Resin Vehicle Type
Acrylic, Latex, Waterborne
Application Method
Roll, Brush, Spray
Project
Cabinet, Bathroom, Trim, Basement, Living Room, Door, Kitchen, Bedroom
Return to service
14 days
Surface Preparation(Prep Guide)
- Clean surfaces to remove dirt, grease, and stains. Rinse thoroughly and allow to dry.
- Repair cracks, nail holes, and surface imperfections with spackling compound.
- Lightly sand glossy or previously painted surfaces for better adhesion.
- Remove all sanding dust using a damp or tack cloth.
- Prime new drywall, repaired areas, or surfaces with major color changes.
Application Guide
- Stir paint thoroughly before use. Do not shake.
- Cut in edges along ceilings, trim, and corners with a brush.
- Roll large wall areas using a W-pattern for even coverage.
- Maintain a wet edge to prevent lap marks.
- Apply two coats for best color depth and durability.
Dry Time: Approximately 1 hour to touch, 2–4 hours between coats.
Cleanup & Maintenance
- Clean brushes and rollers with warm water and soap.
- Allow paint to cure for 14 days before washing.
- Clean painted surfaces gently using a soft cloth or sponge.
- Avoid abrasive cleaners.
Important Notes
Colors may vary due to lighting and screen settings. Always test a sample before full application.
This product is intended for interior use only and is not recommended for floors or exterior surfaces.
- Choosing a selection results in a full page refresh.
- Opens in a new window.