Product Overview
The most discerning designers and homeowners insist on Aura for its stunning colour & incomparable quality.
Features
- Proprietary Colour Lock® technology ensuring long-lasting colour and no color rub-off
- Unparalleled colour depth and richness with smooth, uniform colour
- Ultimate performance in hide for fewer coats
- Resists scuffing and burnishing
- Mildew-resistant finish
- Paint and primer together
- Seamless touch-ups
- Engineered with Gennex® Colour Technology
Data Sheets
SDS
TDS
Specifications
| Finish | Eggshell | Suitable space | Interior |
| Suitable for material type | Concrete, Drywall, Plaster, Wood, Brick, Masonary | VOC Range | <50g/L |
| Dry Time | 1-2 Hour | Clean Up | Warm Soapy Water |
| Recoat Time | 1 Hour | Coverage (Sq. Ft./Gal) | 350-400 |
| Application Temp Range (°F) | 50-90 | Number of Recommended Coats | 1-2 |
| Application Spray Pressure (PSI) | Pressure / 1,000 – 2,000 PSI Tip / 0.013 – 0.017 | Resin Vehicle Type | Acrylic |
| Application Method | Roller, Spray, Brush | Project | Bedroom, Basement, Kitchen, Living Room |
| Return to service | 14 Days |
Finish
Eggshell
Suitable space
Interior
Suitable for material type
Concrete, Drywall, Plaster, Wood, Brick, Masonary
VOC Range
<50g/L
Dry Time
1-2 Hour
Clean Up
Warm Soapy Water
Recoat Time
1 Hour
Coverage (Sq. Ft./Gal)
350-400
Application Temp Range (°F)
50-90
Number of Recommended Coats
1-2
Application Spray Pressure (PSI)
Pressure / 1,000 – 2,000 PSI Tip / 0.013 – 0.017
Resin Vehicle Type
Acrylic
Application Method
Roller, Spray, Brush
Project
Bedroom, Basement, Kitchen, Living Room
Return to service
14 Days
Surface Preparation(Prep Guide)
- Clean surfaces to remove dirt, grease, and stains. Rinse thoroughly and allow to dry.
- Repair cracks, nail holes, and surface imperfections with spackling compound.
- Lightly sand glossy or previously painted surfaces for better adhesion.
- Remove all sanding dust using a damp or tack cloth.
- Prime new drywall, repaired areas, or surfaces with major color changes.
Application Guide
- Stir paint thoroughly before use. Do not shake.
- Cut in edges along ceilings, trim, and corners with a brush.
- Roll large wall areas using a W-pattern for even coverage.
- Maintain a wet edge to prevent lap marks.
- Apply two coats for best color depth and durability.
Dry Time: Approximately 1 hour to touch, 2–4 hours between coats.
Cleanup & Maintenance
- Clean brushes and rollers with warm water and soap.
- Allow paint to cure for 14 days before washing.
- Clean painted surfaces gently using a soft cloth or sponge.
- Avoid abrasive cleaners.
Important Notes
Colors may vary due to lighting and screen settings. Always test a sample before full application.
This product is intended for interior use only and is not recommended for floors or exterior surfaces.
- Choosing a selection results in a full page refresh.
- Opens in a new window.