1 3

REGAL Select Exterior High Build, Low Lustre K401

REGAL Select Exterior High Build, Low Lustre K401

$39.99 CAD
$39.99 CAD
Sold out
Shipping calculated at checkout.
Sheen
Size
Before you or your contractor buy paint, find out exactly how much you will need...
PLEASE NOTE: These calculations assume 2 coats of paint and do not include the ceiling.
Enter dimensions.

SHEEN RECOMMENDATIONS

Interior Paint
FlatCeilings and Walls in Low-Traffic Spaces
Matte/Ulti-MatteWalls and Rooms in Low Traffic Spaces
EggshellWalls and Rooms in High Traffic Spaces
Low LustreDoors, Trim
Pearl/SatinWalls in High-Traffic Spaces, Doors, Trim, Cabinets
Semi-GlossDoors, Trim, Cabinets, Wainscotting
Gloss/High-GlossDoors, Trim, Cabinets, Architectural Details
Exterior Paint
FlatSiding
Low LustreSiding, Trim
SatinSiding, Trim, Shutters, Doors
Semi-GlossTrim, Shutters, Doors, Architectural Details
Gloss/High-GlossDoors, Architectural Details
View full details

Product Overview

Details

  • Available Colours: Available in thousands of colours, Ready Mix White
  • Sheen (or Gloss): Low Lustre
  • Cleanup: Soap and Water
  • Resin Type: 100% Acrylic Latex
  • Recommended Use: Exterior
  • MPI Rating: 15, 315
  • VOC Level: 50.0

Features

  • Sag-resistant formula up to 20 mils wet which allows application of a thicker coating across a variety of substrates, including wood, vinyl/PVC, masonry, and fibre cement board
  • Excellent flow and levelling offers less drag for a smooth, high-build finish across all sheens
  • Flexible high-build formula bridges small cracks and covers minor surface imperfections
  • Breathable film that lets internal moisture escape, minimizing potential blistering and peeling
  • Protects agains harsh weather conditions, including wind-driven rain
  • Low temperature application down to 1.7°C (35°F) extends the painting season
  • Provides a mildew-resistant coating
  • Lifetime limited warranty (see TDS for details)
  • Engineered with Gennex® Colour Technology
  • View the sell sheet for more information
Ideal when you need:

  • High build for superior coverage and fewer coats
  • A Flat finish for a smooth, non-reflective finish that hides imperfections while delivering an ultra-smooth appearance

    • Data Sheets

    SDS

    TDS

    Read More
    Specifications
    Finish low lustre
    Finish
    low lustre
    Recommended Use

    Woodluxe™ Water-Based Exterior Stain is ideal for:

    • Exterior wood decks (pressure-treated, cedar, redwood, hardwoods)
    • Wood siding, shingles, and clapboard
    • Fences, gates, and railings
    • Pergolas, gazebos, and porch structures
    • Outdoor wood furniture, benches, and tables
    • Vertical and horizontal exterior wood surfaces
    Surface Preparation (Exterior)
    • Remove dirt, mildew, chalking, and loose paint using power washing or stiff brush.
    • Allow surfaces to dry completely before painting.
    • Scrape and sand peeling or flaking paint until edges are smooth.
    • Repair cracks, holes, and damaged areas with exterior-grade filler.
    • Prime bare wood, metal, masonry, and repaired areas with an appropriate exterior primer.
    Application Guide
    • Stir paint thoroughly before and during use.
    • Apply when surface and air temperatures are between 50°F and 90°F.
    • Avoid painting in direct sunlight, rain, or high humidity.
    • Use high-quality exterior brushes, rollers, or sprayers.
    • Apply two coats for maximum durability and color retention.
    Cleanup & Maintenance
    • Clean tools immediately with soap and warm water.
    • Allow paint to cure for up to 30 days before heavy washing.
    • Rinse exterior surfaces gently using low pressure.
    • Inspect annually and touch up areas as needed.
    Important Notes

    Weather conditions significantly impact exterior paint performance.

    Do not apply if rain is expected within 24 hours. Colors may vary based on lighting and surface texture.

    Always test a small area before full application.

    Application Guide
    1. Prep the surface: Clean thoroughly to remove dirt, mildew, chalking, and any loose or peeling coating.
    2. Sand if needed: Lightly sand weathered, glossy, or previously coated surfaces to improve adhesion.
    3. Stir well: Stir stain thoroughly before and during use. Do not shake to avoid bubbles.
    4. Apply evenly: Use a brush, pad applicator, roller, or sprayer. Work along the grain and maintain a wet edge.
    5. Avoid direct sun: Apply when the surface is cool and out of direct, hot sunlight.
    6. Second coat (if required): Follow opacity instructions; typically allow 4–6 hours between coats.
    7. Allow to cure: Avoid heavy traffic or furniture placement for at least 48 hours. Full cure in 7–14 days.
    Frequently Asked Questions
    Do I need a primer?

    No. Woodluxe stains are designed to penetrate and protect exterior wood without a separate primer.

    Where can I use Woodluxe Water-Based Stain?

    Ideal for decks, fences, siding, railings, outdoor furniture, and most exterior wood surfaces.

    How long does it last?

    Typical lifespan is 1–3 years depending on exposure, wood condition, and surface preparation.

    Is it slippery when wet?

    When applied as directed, Woodluxe provides a natural, low-sheen surface suitable for exterior walking areas.

    Do I need a topcoat?

    No additional topcoat is required. Woodluxe is a self-sealing exterior stain system.