Product Overview
Peel and Stick Colour Samples painted with real Benjamin Moore paint!
These 12" x 12" inch vinyl colour samples are a peel-and-stick application; repositionable, non-damaging, and leaves no residue on the wall. No painting, no cleanup, and is colour accurate as it is painted with real paint, not digitally printed.
Recommended Use
Woodluxe™ Water-Based Exterior Stain is ideal for:
- Exterior wood decks (pressure-treated, cedar, redwood, hardwoods)
- Wood siding, shingles, and clapboard
- Fences, gates, and railings
- Pergolas, gazebos, and porch structures
- Outdoor wood furniture, benches, and tables
- Vertical and horizontal exterior wood surfaces
Surface Preparation (Exterior)
- Remove dirt, mildew, chalking, and loose paint using power washing or stiff brush.
- Allow surfaces to dry completely before painting.
- Scrape and sand peeling or flaking paint until edges are smooth.
- Repair cracks, holes, and damaged areas with exterior-grade filler.
- Prime bare wood, metal, masonry, and repaired areas with an appropriate exterior primer.
Application Guide
- Stir paint thoroughly before and during use.
- Apply when surface and air temperatures are between 50°F and 90°F.
- Avoid painting in direct sunlight, rain, or high humidity.
- Use high-quality exterior brushes, rollers, or sprayers.
- Apply two coats for maximum durability and color retention.
Cleanup & Maintenance
- Clean tools immediately with soap and warm water.
- Allow paint to cure for up to 30 days before heavy washing.
- Rinse exterior surfaces gently using low pressure.
- Inspect annually and touch up areas as needed.
Important Notes
Weather conditions significantly impact exterior paint performance.
Do not apply if rain is expected within 24 hours. Colors may vary based on lighting and surface texture.
Always test a small area before full application.
Application Guide
- Prep the surface: Clean thoroughly to remove dirt, mildew, chalking, and any loose or peeling coating.
- Sand if needed: Lightly sand weathered, glossy, or previously coated surfaces to improve adhesion.
- Stir well: Stir stain thoroughly before and during use. Do not shake to avoid bubbles.
- Apply evenly: Use a brush, pad applicator, roller, or sprayer. Work along the grain and maintain a wet edge.
- Avoid direct sun: Apply when the surface is cool and out of direct, hot sunlight.
- Second coat (if required): Follow opacity instructions; typically allow 4–6 hours between coats.
- Allow to cure: Avoid heavy traffic or furniture placement for at least 48 hours. Full cure in 7–14 days.
Frequently Asked Questions
Do I need a primer?
No. Woodluxe stains are designed to penetrate and protect exterior wood without a separate primer.
Where can I use Woodluxe Water-Based Stain?
Ideal for decks, fences, siding, railings, outdoor furniture, and most exterior wood surfaces.
How long does it last?
Typical lifespan is 1–3 years depending on exposure, wood condition, and surface preparation.
Is it slippery when wet?
When applied as directed, Woodluxe provides a natural, low-sheen surface suitable for exterior walking areas.
Do I need a topcoat?
No additional topcoat is required. Woodluxe is a self-sealing exterior stain system.