• Clean surfaces to remove dirt, grease, and stains. Rinse thoroughly and allow to dry.
• Repair cracks, nail holes, and surface imperfections with spackling compound.
• Lightly sand glossy or previously painted surfaces for better adhesion.
• Remove all sanding dust using a damp or tack cloth.
• Prime new drywall, repaired areas, or surfaces with major color changes.

• Stir paint thoroughly before use. Do not shake.
• Cut in edges along ceilings, trim, and corners with a brush.
• Roll large wall areas using a W-pattern for even coverage.
• Maintain a wet edge to prevent lap marks.
• Apply two coats for best color depth and durability.

Dry Time: Approximately 1 hour to touch, 2–4 hours between coats.

• Clean brushes and rollers with warm water and soap.
• Allow paint to cure for 14 days before washing.
• Clean painted surfaces gently using a soft cloth or sponge.
• Avoid abrasive cleaners.

Colors may vary due to lighting and screen settings. Always test a sample before full application.

This product is intended for interior use only and is not recommended for floors or exterior surfaces.