1 1

Ultra Spec® SCUFF-X® - Semi-Gloss F487

Ultra Spec® SCUFF-X® - Semi-Gloss F487

$89.99 CAD
$89.99 CAD
Sold out
Shipping calculated at checkout.
Size
Colour
Before you or your contractor buy paint, find out exactly how much you will need...
PLEASE NOTE: These calculations assume 2 coats of paint and do not include the ceiling.
Enter dimensions.

SHEEN RECOMMENDATIONS

Interior Paint
FlatCeilings and Walls in Low-Traffic Spaces
Matte/Ulti-MatteWalls and Rooms in Low Traffic Spaces
EggshellWalls and Rooms in High Traffic Spaces
Low LustreDoors, Trim
Pearl/SatinWalls in High-Traffic Spaces, Doors, Trim, Cabinets
Semi-GlossDoors, Trim, Cabinets, Wainscotting
Gloss/High-GlossDoors, Trim, Cabinets, Architectural Details
Exterior Paint
FlatSiding
Low LustreSiding, Trim
SatinSiding, Trim, Shutters, Doors
Semi-GlossTrim, Shutters, Doors, Architectural Details
Gloss/High-GlossDoors, Architectural Details
View full details

Product Overview

Only Scuff-X® semi-gloss offers our patented scuff-resistance and chip-resistant technologies (Chip-Tech®) to deliver a unique blend of toughness and flexibility, rather than just relying on a hard surface, which can be more brittle and subject to chipping. It withstands direct and glancing blows hits that doors, trim, baseboard, and columns receive on a daily basis.

Features

  • Proprietary scuff-resistant formula
  • Proprietary CHIP-TECH™ chip-resistant technology
  • Single-component paint
  • Superior durability
  • Spatter resistant
  • Washable
  • Low-VOC (<50 g/L)
  • Qualifies for LEED® v4 credit
  • Minimal maintenance and disruption
  • Superior block-resistant
  • Easy application

Recommended for:
For commercial applications. Ideal for elevator doors, door jambs, columns, windows, trim and base boards and other high-traffic commercial and light industrial areas.

Data Sheets

SDS

TDS

Read More
Specifications
Finish Semi-Gloss VOC Range <50g/L
Dry Time 2 Hours Clean Up Warm Soapy Water
Recoat Time 4 Hours Coverage (Sq. Ft./Gal) 400-450
Application Temp Range (°F) 50-90 Number of Recommended Coats 1-2
Resin Vehicle Type Acrylic Copolymer Application Method Spray, Brush, Roll
Project Railing, Cabinet, Bathroom, Trim, Kitchen, Door
Finish
Semi-Gloss
VOC Range
<50g/L
Dry Time
2 Hours
Clean Up
Warm Soapy Water
Recoat Time
4 Hours
Coverage (Sq. Ft./Gal)
400-450
Application Temp Range (°F)
50-90
Number of Recommended Coats
1-2
Resin Vehicle Type
Acrylic Copolymer
Application Method
Spray, Brush, Roll
Project
Railing, Cabinet, Bathroom, Trim, Kitchen, Door
Surface Preparation(Prep Guide)
  • Clean surfaces to remove dirt, grease, and stains. Rinse thoroughly and allow to dry.
  • Repair cracks, nail holes, and surface imperfections with spackling compound.
  • Lightly sand glossy or previously painted surfaces for better adhesion.
  • Remove all sanding dust using a damp or tack cloth.
  • Prime new drywall, repaired areas, or surfaces with major color changes.
Application Guide
  • Stir paint thoroughly before use. Do not shake.
  • Cut in edges along ceilings, trim, and corners with a brush.
  • Roll large wall areas using a W-pattern for even coverage.
  • Maintain a wet edge to prevent lap marks.
  • Apply two coats for best color depth and durability.

Dry Time: Approximately 1 hour to touch, 2–4 hours between coats.

Cleanup & Maintenance
  • Clean brushes and rollers with warm water and soap.
  • Allow paint to cure for 14 days before washing.
  • Clean painted surfaces gently using a soft cloth or sponge.
  • Avoid abrasive cleaners.
Important Notes

Colors may vary due to lighting and screen settings. Always test a sample before full application.

This product is intended for interior use only and is not recommended for floors or exterior surfaces.