Product Overview
A high-performance, one-component latex coating specifically engineered to deliver outstanding performance and protection for the toughest high-traffic areas in busy commercial spaces. This breakthrough product offers superior durability and scuff-resistant properties than traditional 2-component coatings, pre-mixing, short pot-life and application difficulties related to similar products. It will hold up to repeat washing without causing permanent damage to the paint. With its slight gloss, the pearl finish offers the benefits of richer look that is perfect elevator areas, stairwells and locker rooms.
Features
- Proprietary scuff-resistance formula
- Single-component Paint
- Washable
- Quick dry
- Great touch-up
- Spatter resistant
- Easy application
- Qualifies for LEED® v4 credit
- CHPS certified
- Engineered with Gennex® Colour Technology
Recommended for:
For commercial applications Ideal for high-traffic areas in commercial spaces such as school hallways, hospital waiting areas, hotels lobbies, gym locker rooms and bathrooms, retail fitting rooms, cafeterias, bathrooms and stairwells.
Data Sheets
SDS
- SDS F486-01 (English)
- SDS F486-1X (English)
- SDS F486-2X (English)
- SDS F486-3X (English)
- SDS F486-4X (English)
TDS
Specifications
| Color | Multicolor, White | Finish | Satin |
| VOC Range | <50g/L | Dry Time | 1 Hour |
| Clean Up | Warm Soapy Water | Recoat Time | 2-3 Hours |
| Surface | Wood, Plaster, Drywall, Masonry | Coverage (Sq. Ft./Gal) | 400-450 |
| Application Temp Range (°F) | 50-90 | Number of Recommended Coats | 1-2 |
| Application Spray Pressure (PSI) | Pressure / 1,500 – 2,500 PSI Tip / 0.013 – 0.017 | Resin Vehicle Type | Acrylic Copolymer |
| Application Method | Spray, Brush, Roll |
Color
Multicolor, White
Finish
Satin
VOC Range
<50g/L
Dry Time
1 Hour
Clean Up
Warm Soapy Water
Recoat Time
2-3 Hours
Surface
Wood, Plaster, Drywall, Masonry
Coverage (Sq. Ft./Gal)
400-450
Application Temp Range (°F)
50-90
Number of Recommended Coats
1-2
Application Spray Pressure (PSI)
Pressure / 1,500 – 2,500 PSI Tip / 0.013 – 0.017
Resin Vehicle Type
Acrylic Copolymer
Application Method
Spray, Brush, Roll
Surface Preparation(Prep Guide)
- Clean surfaces to remove dirt, grease, and stains. Rinse thoroughly and allow to dry.
- Repair cracks, nail holes, and surface imperfections with spackling compound.
- Lightly sand glossy or previously painted surfaces for better adhesion.
- Remove all sanding dust using a damp or tack cloth.
- Prime new drywall, repaired areas, or surfaces with major color changes.
Application Guide
- Stir paint thoroughly before use. Do not shake.
- Cut in edges along ceilings, trim, and corners with a brush.
- Roll large wall areas using a W-pattern for even coverage.
- Maintain a wet edge to prevent lap marks.
- Apply two coats for best color depth and durability.
Dry Time: Approximately 1 hour to touch, 2–4 hours between coats.
Cleanup & Maintenance
- Clean brushes and rollers with warm water and soap.
- Allow paint to cure for 14 days before washing.
- Clean painted surfaces gently using a soft cloth or sponge.
- Avoid abrasive cleaners.
Important Notes
Colors may vary due to lighting and screen settings. Always test a sample before full application.
This product is intended for interior use only and is not recommended for floors or exterior surfaces.
- Choosing a selection results in a full page refresh.
- Opens in a new window.