Product Overview
An effortless painting experience from start to finish – easy to apply, easy to touch up, easy to maintain. Benjamin Moore premium is more achievable than ever with ben's smooth application, extended open time, exceptional touch-up, and scuff-resistance. And ben delivers Benjamin Moore's stunning 3,500-plus colours with zero VOCs and low odour.
Features
An effortless painting experience from start to finish – easy to apply, easy to touch up, easy to maintain. Benjamin Moore premium is more achievable than ever with ben's smooth application, extended open time, exceptional touch-up, and scuff-resistance. And ben delivers Benjamin Moore's stunning 3,500-plus colours with zero VOCs and low odour.
- Smooth and easy application, great for touch-ups
- Scuff-resistant for an easier to maintain finish
- Excellent hide
- Zero-VOC, low-odour
- Spatter-resistant formula that's easy to clean-up
- Paint and primer together
- Engineered with Gennex® Colour Technology
Data Sheets
SDS
TDS
Specifications
| Color | White, Multicolor | Finish | Semi-Gloss |
| Suitable space | Interior | Intended application | Trim/Molding, Interior walls |
| VOC Range | Zero | Dry Time | 1 Hour |
| Clean Up | Warm Soapy Water | Recoat Time | 2 Hours |
| Surface | Plaster, Masonry, Drywall, Concrete, Brick | Coverage (Sq. Ft./Gal) | 400-450 |
| Application Temp Range (°F) | 50-90 | Number of Recommended Coats | 1-2 |
| Application Spray Pressure (PSI) | Pressure / 1,500 – 2,500 PSI Tip / 0.013 – 0.017 | Resin Vehicle Type | Acrylic |
| Application Method | Brush, Roll, Spray | Project | Cabinet, Bathroom, Trim, Bedroom, Kitchen, Door, Living Room, Basement |
| Return to service | 14 Days |
Surface Preparation(Prep Guide)
- Clean surfaces to remove dirt, grease, and stains. Rinse thoroughly and allow to dry.
- Repair cracks, nail holes, and surface imperfections with spackling compound.
- Lightly sand glossy or previously painted surfaces for better adhesion.
- Remove all sanding dust using a damp or tack cloth.
- Prime new drywall, repaired areas, or surfaces with major color changes.
Application Guide
- Stir paint thoroughly before use. Do not shake.
- Cut in edges along ceilings, trim, and corners with a brush.
- Roll large wall areas using a W-pattern for even coverage.
- Maintain a wet edge to prevent lap marks.
- Apply two coats for best color depth and durability.
Dry Time: Approximately 1 hour to touch, 2–4 hours between coats.
Cleanup & Maintenance
- Clean brushes and rollers with warm water and soap.
- Allow paint to cure for 14 days before washing.
- Clean painted surfaces gently using a soft cloth or sponge.
- Avoid abrasive cleaners.
Important Notes
Colors may vary due to lighting and screen settings. Always test a sample before full application.
This product is intended for interior use only and is not recommended for floors or exterior surfaces.
- Choosing a selection results in a full page refresh.
- Opens in a new window.