1 4

ben Waterborne Interior Paint- Satin/Pearl F628

ben Waterborne Interior Paint- Satin/Pearl F628

$32.99 CAD
$32.99 CAD $32.99 CAD
Sold out
Shipping calculated at checkout.
Sheen
Size
Colour
Before you or your contractor buy paint, find out exactly how much you will need...
PLEASE NOTE: These calculations assume 2 coats of paint and do not include the ceiling.
Enter dimensions.

SHEEN RECOMMENDATIONS

Interior Paint
FlatCeilings and Walls in Low-Traffic Spaces
Matte/Ulti-MatteWalls and Rooms in Low Traffic Spaces
EggshellWalls and Rooms in High Traffic Spaces
Low LustreDoors, Trim
Pearl/SatinWalls in High-Traffic Spaces, Doors, Trim, Cabinets
Semi-GlossDoors, Trim, Cabinets, Wainscotting
Gloss/High-GlossDoors, Trim, Cabinets, Architectural Details
Exterior Paint
FlatSiding
Low LustreSiding, Trim
SatinSiding, Trim, Shutters, Doors
Semi-GlossTrim, Shutters, Doors, Architectural Details
Gloss/High-GlossDoors, Architectural Details
View full details

Product Overview


An effortless painting experience from start to finish – easy to apply, easy to touch up, easy to maintain. Benjamin Moore premium is more achievable than ever with ben's smooth application, extended open time, exceptional touch-up, and scuff-resistance. And ben delivers Benjamin Moore's stunning 3,500-plus colours with zero VOCs and low odour.

Features:

  • Smooth and easy application, great for touch-ups
  • Scuff-resistant for an easier to maintain finish
  • Excellent hide
  • Zero-VOC, low-odour
  • Spatter-resistant formula that's easy to clean-up
  • Paint and primer together
  • Engineered with Gennex® Colour Technology

Data Sheets

SDS

TDS

Read More
Specifications
Color White, Multicolor Finish Satin
Suitable space Interior VOC Range Zero
Dry Time 1 Hour Clean Up Warm Soapy Water
Recoat Time 2 Hours Surface Drywall, Masonry, Plaster, Concrete, Brick
Coverage (Sq. Ft./Gal) 400-450 Application Temp Range (°F) 50-90
Number of Recommended Coats 1-2 Application Spray Pressure (PSI) Pressure / 1,500 – 2,500 PSI Tip / 0.013 – 0.017
Resin Vehicle Type Acrylic Application Method Spray, Brush, Roll
Project Cabinet, Bathroom, Trim, Bedroom, Kitchen, Door, Living Room, Basement Return to service 14 Days
Color
White, Multicolor
Finish
Satin
Suitable space
Interior
VOC Range
Zero
Dry Time
1 Hour
Clean Up
Warm Soapy Water
Recoat Time
2 Hours
Surface
Drywall, Masonry, Plaster, Concrete, Brick
Coverage (Sq. Ft./Gal)
400-450
Application Temp Range (°F)
50-90
Number of Recommended Coats
1-2
Application Spray Pressure (PSI)
Pressure / 1,500 – 2,500 PSI Tip / 0.013 – 0.017
Resin Vehicle Type
Acrylic
Application Method
Spray, Brush, Roll
Project
Cabinet, Bathroom, Trim, Bedroom, Kitchen, Door, Living Room, Basement
Return to service
14 Days
Surface Preparation(Prep Guide)
  • Clean surfaces to remove dirt, grease, and stains. Rinse thoroughly and allow to dry.
  • Repair cracks, nail holes, and surface imperfections with spackling compound.
  • Lightly sand glossy or previously painted surfaces for better adhesion.
  • Remove all sanding dust using a damp or tack cloth.
  • Prime new drywall, repaired areas, or surfaces with major color changes.
Application Guide
  • Stir paint thoroughly before use. Do not shake.
  • Cut in edges along ceilings, trim, and corners with a brush.
  • Roll large wall areas using a W-pattern for even coverage.
  • Maintain a wet edge to prevent lap marks.
  • Apply two coats for best color depth and durability.

Dry Time: Approximately 1 hour to touch, 2–4 hours between coats.

Cleanup & Maintenance
  • Clean brushes and rollers with warm water and soap.
  • Allow paint to cure for 14 days before washing.
  • Clean painted surfaces gently using a soft cloth or sponge.
  • Avoid abrasive cleaners.
Important Notes

Colors may vary due to lighting and screen settings. Always test a sample before full application.

This product is intended for interior use only and is not recommended for floors or exterior surfaces.