Product Overview
Benjamin Moore Woodluxe™ Water-Based Exterior Stain delivers exceptional durability, rich color clarity, and advanced weather protection in a fast-drying, low-odor formula. Designed for decks, siding, fences, and outdoor furniture, Woodluxe enhances the natural beauty of exterior wood while helping protect against UV fading, mildew, and moisture. It’s a professional-grade finish that’s easy enough for homeowners to use with confidence.
Key Features
- Advanced water-based acrylic resin for superior durability
- Excellent UV protection to reduce fading and sun damage
- Deep penetrating formula enhances natural wood grain
- Fast-drying, low-odor, environmentally responsible
- Mildew-resistant coating for long-term outdoor protection
- Fade-resistant pigments for rich, even color
- Low VOC for safer indoor and outdoor application
- Available in Translucent, Semi-Transparent, and Solid finishes
Which Woodluxe Finish Should I Choose?
| Finish | Best For | Appearance | Protection Level |
|---|---|---|---|
| Translucent | New or high-quality wood | Shows full grain and natural variation | Moderate |
| Semi-Transparent | Decks, fences, siding | Adds color while keeping visible wood grain | High |
| Semi-Solid | Weathered wood needing extra coverage | More uniform color with subtle grain visibility | Very High |
| Solid | Older, previously stained, or heavily worn wood | Full color coverage, hides imperfections | Maximum |
Specifications
Specifications
| Brand | Benjamin Moore |
| Product Line | Woodluxe™ Exterior Water-Based Stain |
| Opacities Available | Translucent, Semi-Transparent, Semi-Solid,Solid |
| Base | Water-based acrylic |
| Coverage | Approx. 150–350 sq ft per gallon (depending on wood & opacity) |
| Dry Time | 1–3 hours to touch |
| Recoat Time | 4–6 hours (conditions dependent) |
| Full Cure | 7–14 days |
| Recommended Surfaces | Decks, siding, fences, pergolas, outdoor furniture |
| Clean-Up | Soap and water |
| VOC Level | Low VOC (water-based) |
Recommended Use
Woodluxe™ Water-Based Exterior Stain is ideal for:
- Exterior wood decks (pressure-treated, cedar, redwood, hardwoods)
- Wood siding, shingles, and clapboard
- Fences, gates, and railings
- Pergolas, gazebos, and porch structures
- Outdoor wood furniture, benches, and tables
- Vertical and horizontal exterior wood surfaces
How to Apply Woodluxe Water-Based Stain
- Prep the surface: Clean thoroughly to remove dirt, mildew, chalking, and any loose or peeling coating.
- Sand if needed: Lightly sand weathered, glossy, or previously coated surfaces to improve adhesion.
- Stir well: Stir stain thoroughly before and during use. Do not shake to avoid bubbles.
- Apply evenly: Use a brush, pad applicator, roller, or sprayer. Work along the grain and maintain a wet edge.
- Avoid direct sun: Apply when the surface is cool and out of direct, hot sunlight.
- Second coat (if required): Follow opacity instructions; typically allow 4–6 hours between coats.
- Allow to cure: Avoid heavy traffic or furniture placement for at least 48 hours. Full cure in 7–14 days.
Frequently Asked Questions
Do I need a primer?
No. Woodluxe stains are designed to penetrate and protect exterior wood without a separate primer.
Where can I use Woodluxe Water-Based Stain?
Ideal for decks, fences, siding, railings, outdoor furniture, and most exterior wood surfaces.
How long does it last?
Typical lifespan is 1–3 years depending on exposure, wood condition, and surface preparation.
Is it slippery when wet?
When applied as directed, Woodluxe provides a natural, low-sheen surface suitable for exterior walking areas.
Do I need a topcoat?
No additional topcoat is required. Woodluxe is a self-sealing exterior stain system.
- Choosing a selection results in a full page refresh.
- Opens in a new window.