1 1

Benjamin Moore

Ultra Spec 500 — Interior Satin/Pearl Finish 545

Ultra Spec 500 — Interior Satin/Pearl Finish 545

$54.99 CAD
$54.99 CAD
Sale Sold out
Shipping calculated at checkout.
Paint coverage calculator
Size
Colour
View full details

PRODUCT DETAILS

Product Overview

A professional-quality interior waterborne satin/pearl finish based on a proprietary cross-linking acrylic resin that tints on the Gennex® zero VOC colorant system. 
This waterborne Interior satin/pearl has excellent stain release properties therefore washes clean easily. 
This product is also eligible for LEED® v4 credit and passes the most stringent environmental standards in any color. 

Features

 

  • Excellent hiding
  • Spatter resistant
  • Great touch-up properties
  • Decorative and uniform flat finish
  • Soap-and-water cleanup
  • Zero VOCs
  • Qualifies for LEED credit
  • Washable
  • Quick drying
  • Low odour
  • Easy application
  • Superior flow and levelling
  • MPI approved
  • Engineered with Gennex® Colour Technology

Data Sheets

SDS

TDS

Read More
Specifications
Color Multicolor Finish Satin
VOC Range zero Dry Time 2 Hours
Clean Up Warm Soapy Water Recoat Time 4 Hours
Surface Plaster, Drywall, Concrete, New or Previous Painted Wood Coverage (Sq. Ft./Gal) 400-450
Application Temp Range (°F) 50-90 Number of Recommended Coats 2
Application Spray Pressure (PSI) Pressure / 1,500 – 2,500 PSI Tip / 0.013 – 0.017 Resin Vehicle Type Acrylic Copolymer
Application Method Roll, Brush, Spray Project Cabinet, Bathroom, Trim, Kitchen, Door
Return to service 14 Days
Color
Multicolor
Finish
Satin
VOC Range
zero
Dry Time
2 Hours
Clean Up
Warm Soapy Water
Recoat Time
4 Hours
Surface
Plaster, Drywall, Concrete, New or Previous Painted Wood
Coverage (Sq. Ft./Gal)
400-450
Application Temp Range (°F)
50-90
Number of Recommended Coats
2
Application Spray Pressure (PSI)
Pressure / 1,500 – 2,500 PSI Tip / 0.013 – 0.017
Resin Vehicle Type
Acrylic Copolymer
Application Method
Roll, Brush, Spray
Project
Cabinet, Bathroom, Trim, Kitchen, Door
Return to service
14 Days
Surface Preparation(Prep Guide)
  • Clean surfaces to remove dirt, grease, and stains. Rinse thoroughly and allow to dry.
  • Repair cracks, nail holes, and surface imperfections with spackling compound.
  • Lightly sand glossy or previously painted surfaces for better adhesion.
  • Remove all sanding dust using a damp or tack cloth.
  • Prime new drywall, repaired areas, or surfaces with major color changes.
Application Guide
  • Stir paint thoroughly before use. Do not shake.
  • Cut in edges along ceilings, trim, and corners with a brush.
  • Roll large wall areas using a W-pattern for even coverage.
  • Maintain a wet edge to prevent lap marks.
  • Apply two coats for best color depth and durability.

Dry Time: Approximately 1 hour to touch, 2–4 hours between coats.

Cleanup & Maintenance
  • Clean brushes and rollers with warm water and soap.
  • Allow paint to cure for 14 days before washing.
  • Clean painted surfaces gently using a soft cloth or sponge.
  • Avoid abrasive cleaners.
Important Notes

Colors may vary due to lighting and screen settings. Always test a sample before full application.

This product is intended for interior use only and is not recommended for floors or exterior surfaces.