PRODUCT DETAILS
Product Overview
The interior paint pros have relied on for over 60 years to deliver renowned Benjamin Moore quality.
Features
- Stain release technology that is easy to clean with less scrubbing
- Excellent hide and coverage for a uniform finish
- Applies easily and smoothly
- Paint and primer together
- Mildew resistant
- A versatile and durable finish
- Zero VOC, low odour
- Engineered with Gennex® Colour Technology
- View the sell sheet for more information
Data Sheets
SDS
- SDS F549-01 (English)
- SDS F549-1X (English)
- SDS F549-2X (English)
- SDS F549-3X (English)
- SDS F549-4X (English)
TDS
Specifications
| Color | White, Multicolor | Finish | Eggshell |
| Suitable space | Interior | Intended application | Interior walls |
| VOC Range | <50g/L | Dry Time | 1 Hour |
| Clean Up | Warm Soapy Water | Recoat Time | 1-2 Hour |
| Surface | Concrete, Plaster, Masonry, Drywall, Concrete, Brick | Coverage (Sq. Ft./Gal) | 400-450 |
| Application Temp Range (°F) | 50-90 | Number of Recommended Coats | 1-2 |
| Application Spray Pressure (PSI) | Pressure / 1,500 – 2,500 PSI Tip / 0.013 – 0.017 | Resin Vehicle Type | Acrylic |
| Application Method | Spray, Brush, Roll | Project | Kitchen, Bedroom, Living Room, Basement |
Color
White, Multicolor
Finish
Eggshell
Suitable space
Interior
Intended application
Interior walls
VOC Range
<50g/L
Dry Time
1 Hour
Clean Up
Warm Soapy Water
Recoat Time
1-2 Hour
Surface
Concrete, Plaster, Masonry, Drywall, Concrete, Brick
Coverage (Sq. Ft./Gal)
400-450
Application Temp Range (°F)
50-90
Number of Recommended Coats
1-2
Application Spray Pressure (PSI)
Pressure / 1,500 – 2,500 PSI Tip / 0.013 – 0.017
Resin Vehicle Type
Acrylic
Application Method
Spray, Brush, Roll
Project
Kitchen, Bedroom, Living Room, Basement
Surface Preparation(Prep Guide)
- Clean surfaces to remove dirt, grease, and stains. Rinse thoroughly and allow to dry.
- Repair cracks, nail holes, and surface imperfections with spackling compound.
- Lightly sand glossy or previously painted surfaces for better adhesion.
- Remove all sanding dust using a damp or tack cloth.
- Prime new drywall, repaired areas, or surfaces with major color changes.
Application Guide
- Stir paint thoroughly before use. Do not shake.
- Cut in edges along ceilings, trim, and corners with a brush.
- Roll large wall areas using a W-pattern for even coverage.
- Maintain a wet edge to prevent lap marks.
- Apply two coats for best color depth and durability.
Dry Time: Approximately 1 hour to touch, 2–4 hours between coats.
Cleanup & Maintenance
- Clean brushes and rollers with warm water and soap.
- Allow paint to cure for 14 days before washing.
- Clean painted surfaces gently using a soft cloth or sponge.
- Avoid abrasive cleaners.
Important Notes
Colors may vary due to lighting and screen settings. Always test a sample before full application.
This product is intended for interior use only and is not recommended for floors or exterior surfaces.
- Choosing a selection results in a full page refresh.
- Opens in a new window.
