• Clean surfaces to remove dirt, grease, and stains. Rinse thoroughly and allow to dry.
• Repair cracks, nail holes, and surface imperfections with spackling compound.
• Lightly sand glossy or previously painted surfaces for better adhesion.
• Remove all sanding dust using a damp or tack cloth.
• Prime new drywall, repaired areas, or surfaces with major color changes.

• Stir paint thoroughly before use. Do not shake.
• Cut in edges along ceilings, trim, and corners with a brush.
• Roll large wall areas using a W-pattern for even coverage.
• Maintain a wet edge to prevent lap marks.
• Apply two coats for best color depth and durability.

Dry Time: Approximately 1 hour to touch, 2–4 hours between coats.

• Clean brushes and rollers with warm water and soap.
• Allow paint to cure for 14 days before washing.
• Clean painted surfaces gently using a soft cloth or sponge.
• Avoid abrasive cleaners.

Colors may vary due to lighting and screen settings. Always test a sample before full application.

This product is intended for interior use only and is not recommended for floors or exterior surfaces.

• Remove dirt, mildew, chalking, and loose paint using power washing or stiff brush.
• Allow surfaces to dry completely before painting.
• Scrape and sand peeling or flaking paint until edges are smooth.
• Repair cracks, holes, and damaged areas with exterior-grade filler.
• Prime bare wood, metal, masonry, and repaired areas with an appropriate exterior primer.

• Stir paint thoroughly before and during use.
• Apply when surface and air temperatures are between 50°F and 90°F.
• Avoid painting in direct sunlight, rain, or high humidity.
• Use high-quality exterior brushes, rollers, or sprayers.
• Apply two coats for maximum durability and color retention.

• Clean tools immediately with soap and warm water.
• Allow paint to cure for up to 30 days before heavy washing.
• Rinse exterior surfaces gently using low pressure.
• Inspect annually and touch up areas as needed.

Weather conditions significantly impact exterior paint performance.

Do not apply if rain is expected within 24 hours. Colors may vary based on lighting and surface texture.

Always test a small area before full application.