1 1

Benjamin Moore

Kitchen and Bath Pearl(Y322)

Kitchen and Bath Pearl(Y322)

$46.99 CAD
$46.99 CAD
Sale Sold out
Shipping calculated at checkout.
Paint coverage calculator
Size
Colour
View full details

PRODUCT DETAILS

Product Overview

Kitchen & Bath is a premium quality pearl finish enamel designed to resist mildew growth in kitchens and bathrooms.

Features:

  • Applies easily and smoothly
  • Exceptional durability and colour retention
  • Mildew resistant even under humid conditions
  • Self priming on most surfaces
  • Low VOCs
  • Engineered with Gennex® Colour Technology
Read More
Specifications
Finish Satin VOC Range <50g/L
Dry Time 1 Hour Clean Up soap and water
Recoat Time 4 Hour Surface Drywall, Masonry, Plaster, Wood
Coverage (Sq. Ft./Gal) 400-450 Application Temp Range (°F) 50-90
Number of Recommended Coats 1-2 Application Spray Pressure (PSI) Pressure / 1,500 – 2,500 PSI Tip / 0.011 – 0.015
Resin Vehicle Type Acrylic Application Method Roll, Brush, Spray
Project Kitchen, Bathroom Return to service Painted surfaces can be washed after two weeks.
Finish
Satin
VOC Range
<50g/L
Dry Time
1 Hour
Clean Up
soap and water
Recoat Time
4 Hour
Surface
Drywall, Masonry, Plaster, Wood
Coverage (Sq. Ft./Gal)
400-450
Application Temp Range (°F)
50-90
Number of Recommended Coats
1-2
Application Spray Pressure (PSI)
Pressure / 1,500 – 2,500 PSI Tip / 0.011 – 0.015
Resin Vehicle Type
Acrylic
Application Method
Roll, Brush, Spray
Project
Kitchen, Bathroom
Return to service
Painted surfaces can be washed after two weeks.
Surface Preparation(Prep Guide)
  • Clean surfaces to remove dirt, grease, and stains. Rinse thoroughly and allow to dry.
  • Repair cracks, nail holes, and surface imperfections with spackling compound.
  • Lightly sand glossy or previously painted surfaces for better adhesion.
  • Remove all sanding dust using a damp or tack cloth.
  • Prime new drywall, repaired areas, or surfaces with major color changes.
Application Guide
  • Stir paint thoroughly before use. Do not shake.
  • Cut in edges along ceilings, trim, and corners with a brush.
  • Roll large wall areas using a W-pattern for even coverage.
  • Maintain a wet edge to prevent lap marks.
  • Apply two coats for best color depth and durability.

Dry Time: Approximately 1 hour to touch, 2–4 hours between coats.

Cleanup & Maintenance
  • Clean brushes and rollers with warm water and soap.
  • Allow paint to cure for 14 days before washing.
  • Clean painted surfaces gently using a soft cloth or sponge.
  • Avoid abrasive cleaners.
Important Notes

Colors may vary due to lighting and screen settings. Always test a sample before full application.

This product is intended for interior use only and is not recommended for floors or exterior surfaces.