PRODUCT DETAILS
Specifications
| Intended application | Cabinets, small furniture , Trim/Molding, Furniture |
Intended application
Cabinets, small furniture , Trim/Molding, Furniture
Recommended Use
Woodluxe™ Water-Based Exterior Stain is ideal for:
- Exterior wood decks (pressure-treated, cedar, redwood, hardwoods)
- Wood siding, shingles, and clapboard
- Fences, gates, and railings
- Pergolas, gazebos, and porch structures
- Outdoor wood furniture, benches, and tables
- Vertical and horizontal exterior wood surfaces
Application Guide
- Prep the surface: Clean thoroughly to remove dirt, mildew, chalking, and any loose or peeling coating.
- Sand if needed: Lightly sand weathered, glossy, or previously coated surfaces to improve adhesion.
- Stir well: Stir stain thoroughly before and during use. Do not shake to avoid bubbles.
- Apply evenly: Use a brush, pad applicator, roller, or sprayer. Work along the grain and maintain a wet edge.
- Avoid direct sun: Apply when the surface is cool and out of direct, hot sunlight.
- Second coat (if required): Follow opacity instructions; typically allow 4–6 hours between coats.
- Allow to cure: Avoid heavy traffic or furniture placement for at least 48 hours. Full cure in 7–14 days.
Frequently Asked Questions
Do I need a primer?
No. Woodluxe stains are designed to penetrate and protect exterior wood without a separate primer.
Where can I use Woodluxe Water-Based Stain?
Ideal for decks, fences, siding, railings, outdoor furniture, and most exterior wood surfaces.
How long does it last?
Typical lifespan is 1–3 years depending on exposure, wood condition, and surface preparation.
Is it slippery when wet?
When applied as directed, Woodluxe provides a natural, low-sheen surface suitable for exterior walking areas.
Do I need a topcoat?
No additional topcoat is required. Woodluxe is a self-sealing exterior stain system.
- Choosing a selection results in a full page refresh.
- Opens in a new window.